英语翻译（1）将较细的一根弹簧悬挂在铁架台上.用毫米刻度尺量出弹簧的长度10,并填入表中.（2）在弹簧下挂1个钩码,用毫

Hang the thinner spring to the iron stand.Measure the 10  length of the spring with mm scale and fill it in the form;

Hang a hook code to the spring; Measure the 1 length of the spring with mm scale and fill it in the form;
Hang 2,3,4,5,6,7 and 8 equal hook codes respectively and measure 1 length of the spring for each hook code and fill in the form;
Calculate the elongation(1-8)  of the spring with 1,2,3,4,5,6,7 and 8 hook codes respectively and fill in the form;
Trace points on coordinate paper according to the measured data with the power as the ordinate and the elongation as the abscissa;
Try to make a straight line as per the distribution and trend of all the points in the coordinate graph.Not all of the points are on the line necessarily,but the quantity of the points should be similar to each side of the curve;
Write down the the function the curve represents with the elongation of the spring as the independent variable.

再问： 还有下面四条，拜托啦QAQ 那四条翻译完就采纳！！
再答： There might be certain accidental errors in scale reading, but repeated operation can reduce the effects;Movements of hands during scale reading might result in accidental errors due to non-correspondence between force sensor readings before movements and the deformation quantity of the spring;The spring not vertical to the ground during experiment might result in system errors due to deviation in the reading of one of the componet force sensor under the force to the spring; There might be accidental errors if the spring turns might not be controlled into integers during each operation.