英语翻译我司的每个完成品在同一地方表示生产批号（用9位数-3位数—3位数表示）.表示位置、表示方法遵照各产品图纸.但是,

我司的每个完成品在同一地方表示生产批号（用9位数-3位数—3位数表示）.表示位置、表示方法遵照各产品图纸.但是,对于规格书上未表示的,在其它用途的协议上,决定表示方法.
Division I of each finished product in the same place that production batch number (9digit3 digit3 digit representation - - ). Said position, said method to each product drawings. However, the specification does not say, in other uses for the protocol, decision method.
购买后12个月内明显是由于制造者的原因发生质量问题的应无偿退还,操作使用在双方的协议 上.但是,关于防锈处理在6个月内,包装好后放置在适当温湿度的 室内保管.严格按照交易基本合同书、品质保证协议书执行.
After the purchase within 12 months were due to manufacturing the reason of quality problems should be free to return, operating on both sides of the agreement. However, on the anti-rust treatment within 6 months, well packaged and placed in the appropriate temperature and humidity of the indoor storage. In strict accordance with the basic transaction contract, quality assurance agreement implementation.
产品包装时,为了防止在运输途中发生损伤,叠放在一起放入包装胶袋中密封,部品票贴在包装胶袋外,包装纳入时按照下列1）～4）表示的执行.
Product packaging, in order to prevent damage in transit, stacked together into packaging bags sealing, Bupin ticket affixed to the packing bags, packing into according to the following1) ~ 4) representation of the executive.
3M600#胶带平贴在电镀层表面,以90度方向撕离
3M600# tape flat on the plating layer of the surface, with the direction of 90 degrees apart
焊接区域上锡面积达到95%以上
Welding area tin area for more than 95%
板面无起泡、分层、白点或颜色明显变化
Face blister, stratification, white or color change
无镀锡层脱落(焊盘和线路边缘丝状脱镀层可以不计)
No tin layer off ( pad and line edge of filamentous and coating can be neglected )
制品表面镀层厚度测量结果
Products surface coating thickness measurement